Filter
Top Products
1
2
3
4
5
6
7
8
9
17
z GETTING STARTED
Turning Power On/Off
Insert the tape cassette into the tape
compartment, with the end of the tape
facing the machine's tape exit slot, and
press firmly until you hear a click.
Close the tape compartment cover.
Press the
Power
key to turn the P-touch
labeler
on.
Press the
Power
key again to turn the P-touch
labeler
off.
zAuto Power-Off Timez
When inserting the tape cassette,
make sure that the tape and ink
ribbon do not catch on the print head.
Tape exit slot
3
Make sure that the release lever is up when closing the
tape compartment cover. The tape compartment cover
cannot be closed if the release lever is pressed down.
4
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape
cassette, by holding down the
Shift
key and pressing the
Preview
key.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon
to be discharged with the tape.
• Store tape cassettes in a cool dark location, away from direct sunlight and high temperature,
high humidity, or dusty locations. Use the tape cassette as quickly as possible after opening
the sealed package.
Turning Power On/Off
• Your P-touch labeler has a power saving function that automatically turns itself off if no key
is pressed within a certain time under certain operating conditions. Refer to the Auto Power-
Off Time table below for details.
• If the batteries are installed or the P-touch labeler is connected to an electrical outlet by the
AC adapter, the previous session’s information is displayed when the power is turned on.
With AC adapter
5 minutes
With battery
5 minutes