Filter
Top Products
19
Power Supply
GETTING STARTED
AC Adapter
Use the AD-E001 (AC adapter) for this labeling system. The AD-18 or AD-24ES cannot be
used. Connect the AC adapter directly to the P-touch labeling system.
Insert the plug on the AC adapter cord into the connector marked DC IN 12V on the
P-touch labeling system.
Insert the AC adapter plug into a standard electrical outlet.
Using the Rechargeable Li-ion Battery
Installing the Rechargeable Li-ion Battery
Open the rear cover by pressing the cover latch.
Power Supply
1
2
• Turn the P-touch labeling system off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory will also be cleared.
To safeguard and backup the labeling system's memory, when the AC adapter is unplugged it is
recommended to have AA-size alkaline batteries (LR6) or Ni-MH rechargeable batteries (HR6)
installed in the labeling system.
Cover latch
Rear cover
1