Filter
Top Products
1
2
3
4
5
6
7
8
9
28
z EDITING A LABEL
Selecting a Labeling Application Type
CABLE WRAP
Labels printed with this mode can be wrapped around a cable or wire.
This mode is also used to print on Heat Shrink Tube.
In Flexible ID, the text is rotated 90° counterclockwise and printed, you
can also specify the Size, Text and Repeat (ON/OFF).
Flexible ID
•UOM: Cust Dia (Custom Diameter), CAT5/6, CAT6e, COAX, AWG,
Cust Len (Custom Length)
• Value: Depending on UOM
• Repeat: On, Off
Text: Type in single or multiple lines of data
Heat Shrink Tube
• Label length: Auto
Text: Type in single or multiple lines of data
CABLE FLAG
Labels printed with this mode can be wrapped around a cable or wire,
and both ends of the label stick together to form a flag. The text on flag
labels is printed on both ends of the label, leaving a blank space in the
middle that wraps around the cable. In this mode, you can specify
Layout, Flag Length, Cable Diameter and Orientation.
• Layout: AA|AA (The same text is printed on each block.),
AA|BB (Two different texts are printed on each block.)
• Flag Length: 1.2" (30 mm), 0.6" (15 mm) - 8.0" (200 mm)
• Cable Diameter: 0.25" (6 mm), 0.12" (3 mm) - 3.50" (90 mm)
• Orientation: (Horizontal), (Vertical)
When using Heat Shrink Tube:
•Press Cable Wrap key. The screen to select the type of tape is displayed. Select Heat-
shrink Tube by using or key and then input text.
• Only the length of tape can be set when Heat Shrink Tube is selected. Margin setting is
fixed to No Cut.
Horizontal Vertical
Flag
length
Flag
diameter
Flag
length
Flag
length
Flag
diameter
Flag
length
You can enter up to two bar codes when (AA|AA) is selected in flag layout.