Filter
Top Products
Adjusting the Machine
4-61
4
Customizing Settings
NOTE
•
Saddle stitch staple repositioning can be performed only if the optional Saddle
Finisher-AE2 is attached.
•
Paper that is required for the saddle stitch staple repositioning procedure is automatically
fed to the saddle stitcher unit by the machine.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Saddle Stitcher Staple Repositioning].
2
Press [Start].
Saddle Stitch Position Adjustment
If you are using the Saddle Stitch mode of the optional Saddle Finisher-AE2, and
you notice that the folds of the paper are not exactly in the middle of the booklet,
you can make adjustments to the saddle stitch position to compensate for this error.
NOTE
The saddle stitch position can only be adjusted if the optional Saddle Finisher-AE2 is
attached.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Saddle Stitch Position Adjustment].
2
Select the paper size for which you want to adjust the saddle
stitch position.
NOTE
Some of the paper sizes displayed may not be available in certain countries.
3
Press [▼] or [▲] to adjust the saddle stitch position ➞
press [OK].