Filter
Top Products
Finisher-S1/Puncher Unit-R1 (Optional)
7-29
7
Routine Maintenance
Finisher-S1/Puncher Unit-R1 (Optional)
This section describes the procedure for replacing the staple cartridge in the
optional Finisher-S1, and removing punch waste from the optional Puncher
Unit-R1.
Replacing the Staple Cartridge
When the optional Finisher-S1 is almost out of staples and the staple cartridge
must be replaced, a screen similar to the one shown below appears on the touch
panel display. Follow the procedure described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.
NOTE
We recommend that you order staple cartridges from your local authorized Canon dealer
before your stock runs out.
1
Open the front cover of the finisher.