Filter
Top Products
Making Prints Using the Stack Bypass
2-43
2
Basic Operations
When you use the stack bypass to make copies, straighten out curled paper
prior to use, as shown below. Curled paper may cause a paper jam.
To print on the back side of preprinted paper, load the preprinted paper face up
into the stack bypass, as shown in the illustration below.
IMPORTANT
•
If the paper retaining lever is not set securely, a paper jam may occur, or paper may
be fed from a paper drawer instead of the stack bypass.
•
When loading paper into the stack bypass, align the paper stack neatly between
the slide guides. If the paper is not loaded correctly, a paper jam may occur.
•
If you are printing on heavyweight paper or envelopes using the stack bypass, and
find that the paper or envelopes are not being fed smoothly or evenly through the
stack bypass, remove the paper or envelopes, curl the feeding edges upward
approximately 1/8" (3 mm), and then reload the paper or envelopes. Curling the
feeding edges enables the rollers to grip the paper or envelopes as they are fed
into the stack bypass.
Feeding Direction
Feeding
Direction
When copying on the back
side of a preprinted sheet.
Output
Direction
After the first one-sided
copy is made