Filter
Top Products
AXIS 1610 User’s Manual Section 3: Installation
19
Using ARP in
Windows 95/98, ME
& Windows NT, 2000
Follow the instructions below to set the IP address using ARP:
1.
Start a DOS window.
Type the following commands:
Example
The host will return
Reply from 192.168.3.191 ... or a
similar message. This indicates that the address has been set and
that the communication is established.
Notes:
❏ When using the Windows 95 implementation of ARP, change the
first line to:
arp -s <IP address> <Ethernet address> <w95host IP
address>
, where <w95host IP address> is the IP address of
your Windows 95 host.
❏ When you execute the ping command for the first time, you will
experience a significantly longer response time than usual
.
❏
By using the arp -d command, the static entry in the arp table is
removed from the cache memory of the host.
arp -s <IP address> <Ethernet address>
ping <IP address>
arp -d <IP address>
arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191
arp -d 192.168.3.191