Filter
Top Products
Section 4: Management & Configuration AXIS 1610 User’s Manual
32
Section 4 Management & Configuration
The management and configuration tools that are supported by
the AXIS 1610 allow you to:
• Change the print server parameters, i.e. editing the config file
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the AXIS 1610
• Upgrade the AXIS 1610 firmware (Refer to Section 5 Upgrading
the Firmware, on page 50)
Configuration
Overview
The method you should use to manage and configure your AXIS
1610 is dictated by the operating system protocols of your
network. The table below displays which method to use for
supported network protocols:
Network Protocols Configuration/Management methods
TCP/IP
• Web Browser - See page 33
• Netspot - See page 36
• FTP - See page 44
• SNMP - See page 47
NetBIOS/NetBEUI • AXIS NetPilot - See page 37
IPX
• AXIS NetPilot - See page 37
• Netspot - See page 36