Filter
Top Products
AXIS 1610 User’s Manual Section 3: Installation
21
2. Update, if necessary, your host table and alias name databases,
as required by your system.
3. If it is not already running, start the RARP daemon. This is
typically performed using the
rarpd -a command.
4. Restart the AXIS 1610 to download the IP address.
Note:
❏ If you are using IBM AIX, you will probably not have access to a
RARP daemon. If this is the case, you can use either the ARP or
BOOTP methods instead.
Using BOOTP
in UNIX
Follow the instructions below to set the IP address using BOOTP
1. Append the following entry to your boot t
able. This is typically
performed by editing the file:
/etc/bootptab
Example :
Notes: ❏ Enter the ht and vm fields exactly as shown in the example.
❏ The ha field is the Ethernet address/node address and the ip field
is the IP address of your AXIS 1610.
❏ The gw and sm fields correspond to the default router address and
subnet mask
.
2. If necessary, update your host table and alias name databases, as
required by your system.
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<IP address>:\
:sm=<subnet mask>:gw=<gateway field>
npsname:ht=ether:vm=rfc1048:\
:ha=00408c100086:ip=192.168.3.191:\
:sm=255.255.255.0:gw=192.168.1.1