Filter
Top Products
39 Projecting
Connecting to a component video device
You can project component video images by connecting a component cable (RCA-
mini D-sub 15 pin) (commercially available) to the projector's PC jack.
1. Connect the end of the component cable with three RCA type connectors to the
Component Video output jacks of the Video device. Match the color of the plugs
to the color of the jacks; green to green, blue to blue, and red to red.
2. Connect the cable's mini D-sub 15 pin jack to the projector's PC input jack.
3. To use the projector's speaker, connect a commercially available audio cable to
the audio output jacks of the Video device. Connect the audio cable's stereo mini
plug to the projector's audio input jack.
No sound (audio signal) will be output from the speaker or audio output jack if video
signals are not being input from the video device.
Audio cable
(commercially
available)
Video device
Component cable (RCA-mini D-sub 15 pin)
(commercially available)