56 Troubleshooting
Error No.: 1700/1710 Is Displayed
Error No.: 2001 Is Displayed
Error No.: 2002 Is Displayed
Machine is not connected properly. Make sure that the USB cable is securely plugged in to the machine and the
computer.
z If you are using a relay device such as a USB hub, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
z There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
Your machine is not selected in Printer
on the Print dialog box.
Select your machine’s name in Printer on the Print dialog box.
If your machine’s name does not appear in Printer, follow the procedure below
to check that the driver for your machine is installed to your computer.
(1)Select Print & Fax Preferences in Printer.
In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List in Printer.
(2)Check that your machine’s name is displayed in the list of printers and that
the check box is selected.
In Mac OS X v.10.2.8, check that your machine’s name is displayed in
Printer List.
(3)If your machine’s name is not displayed, click Add(+) to add the machine.
If you cannot add the machine, follow the procedure described in your setup
sheet to reinstall the MP Drivers.
Cause Action
The ink absorber is almost full. See “E, 8” (Ink absorber is almost full.) in “An Error Code Is Displayed on the
LED” on page 44.
Cause Action
No response from connected digital
camera or video camcorder. /
Connected digital camera or video
camcorder is not compatible with this
machine.
See “E, 9” (The digital camera or digital video camcorder connected is not
compatible with this machine.) in “An Error Code Is Displayed on the LED” on
page 44.
Cause Action
PictBridge compliant device is
connected via a USB hub.
See “E, 1, 9” (PictBridge compliant device is connected via a USB hub.) in “An
Error Code Is Displayed on the LED” on page 45.
Cause Action