Filter
Top Products
17
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or
close the On-Screen
Menu. (p.18, 19)
MENU BUTTON
LAMP MODE BUTTON
READY INDICATOR
OK BUTTON
POWER BUTTON
INPUT BUTTON
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS
LAMP REPLACE INDICATOR
Used to select a Lamp
mode. (p.41)
Lights green when the
projector is ready to be
turned on. And it blinks
green in the Power
management mode.
(pp.40, 46, 56–57)
Becomes dim when the
projector is turned on.
And it becomes bright
when the projector is in
stand-by mode.
(pp.20–21, 56–57)
Turns to orange when the
projection lamp reaches its
end of life.
Blinks orange when the lamp
cannot light up. (pp.48, 56–57)
Blinks red when the internal
temperature of the projector
is too high. (pp.46, 56–57)
Used to select an
input source.
(pp.24, 31)
Used to select an item or adjust a
value in On-Screen Menu. They are
also used to pan the image in the
DIGITAL ZOOM +/– mode. (p.30)
The POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
(p.23)
Used to execute
the selected item.
It is also used to
expand/compress
the image in the
DIGITAL ZOOM
mode. (p.30)
Used to turn the
projector on or off.
(pp.20–21)
Used to adjust zoom.
(p.22)
FOCUS BUTTON
Used to adjust focus.
(p.22)
ZOOM BUTTON
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
LENS SHIFT BUTTON
Used to select the Lens
Shift function. (p.22)
AUTO PC ADJ. BUTTON
Used to operate the Auto
PC Adjustment function.
(p.26)
Lights when the Lamp
mode is set to “Silent”
mode. (p.41)
LAMP MODE INDICATOR