Filter
Top Products
35
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the IMAGE ADJUST Menu
icon.
1
2
Press the POINT UP/DOWN buttons to move the red
frame pointer to the desired item and then press the
OK button. The level of each item is displayed. Adjust
each level by pressing POINT LEFT/RIGHT buttons.
IMAGE ADJUST MENU
Press the POINT LEFT button to decrease contrast; press the
POINT RIGHT button to increase the contrast (from 0 to 63).
Press the POINT LEFT button to decrease the brightness; press
the POINT RIGHT button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the POINT LEFT button decrease the intensity of the color;
press the POINT RIGHT button to increase the intensity of the
color (from 0 to 63).
Press the POINT LEFT/RIGHT buttons to adjust the tint value to
obtain proper color balance (from 0 to 63).
Color
Tint
Color Management
The Color management function can be used to adjust the LEVEL,
PHASE, and GAMMA of the selected display colors (except for
black, white, and gray) on the screen and replace these colors with
other colors if required.
You can store up to eight (8) color management data.
1
Press the POINT UP/DOWN buttons to move the red frame
pointer to Color management, and then press the OK button.
The image being projected freezes, and the COLOR
MANAGEMENT POINTER appears.
Use the POINT UP/DOWN/LEFT/RIGHT buttons to move the
pointer to a spot where you want to adjust the color and then
press the OK button. The COLOR SELECTION window
appears, and the color in the center of the pointer is selected
and you can adjust the color.
2
Use the POINT UP/DOWN/LEFT/RIGHT buttons to adjust the
LEVEL and PHASE of the color, and then press the OK button
to confirm the setting. Then use the POINT UP/DOWN
buttons to adjust the GAMMA for the color and press the OK
button to accept the setting. After adjusting, press the OK
button to go to the COLOR MANAGEMENT LIST.
3
NOTE:
Press the COLOR M. button on the remote
control unit to display the COLOR MANAGEMENT
POINTER.
If you would like to check or readjust the color
management setting that has already been made,
press the COLOR M. button on the remote
control unit once more to display the COLOR
MANAGEMENT LIST.
COLOR MANAGEMENT
POINTER
POINTER MODE
PICTURE IMAGE ADJUSTMENTS
PICTURE IMAGE
Move the red frame pointer to item to be
selected and then press OK button.
IMAGE ADJUST Menu icon
Press the POINT LEFT/RIGHT buttons to
adjust the value.
COLOR SELECTION MODE
Go to the COLOR MANAGEMENT LIST.
LIST