Filter
Top Products
117
Projecting an Image from a Digital Camera (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
Running a Slideshow
You can run a slideshow that projects multiple images stored in the digital camera at cer-
tain intervals.
■Setting a Slideshow Interval
By setting projection intervals in [Slideshow interval] from the menu, you can run a slide-
show of the images (with PictBridge or from a USB flash memory) connected via USB.
Set the slideshow interval by following the steps below.
1 Press the MENU button to display the menu.
2 Select [System settings] tab with [<] / [>], and select [Slideshow interval] with [ ] / [ ].
3 Set the interval (minute:second) other than "--:--" with [<] / [>].
To stop the slideshow, set as "--:--".
4 Press the MENU button to exit the menu.
It may take a certain time depending on the screen size.
■Finishing projection
To finish projecting images using PictBridge, turn off the power to the PictBridge enabled
equipment.
Then, remove the USB cable from the equipment.
Remote control Top control
<
<
Remote control Top control
Remote control Top control