Canon SX80 Mark II Projector User Manual


 
Relationship between Aspect and Screen Aspect
148
When Projecting an Image from Image Software
To project an image such as an image shot by a TV set, commercially available DVD software,
or video camcorder (input signal [HDMI (SX80 II)], [VIDEO], [S-VIDEO (SX80 II)], [COMPO-
NENT]), select an aspect ratio according to the image software format as follows.
*1
[Auto] cannot be selected for the aspect setting if the input signal type is [VIDEO].
*2
If an image from image software with aspect ratio of 16:9 is not projected correctly, select [16:9]
as screen aspect.
*3
If you project the 16:9 image with black borders at top and bottom such as in the terrestrial movie
broadcasting, you can project the 16:9 image fully on the screen by selecting [Zoom] in [Aspect].
[Zoom] is available when [16:9] or [16:9 D. image shift] is selected for the screen aspect and
[HDMI (480p)(SX80 II)], [COMPONENT (480p, 480i)], [VIDEO] or [S-VIDEO (SX80 II)] is selected
for the input signal.
*4
To perform keystone adjustment (P60), select [4:3] or [16:9] for [Screen aspect].
Screen
Screen Aspect Ratio
Setting
Image Software
Format
Projection Result
Aspect
Setting
[4:3] [Auto]
*1
[16:9]
[16:9 D. image shift]
*4
[Auto]
*2
[Zoom]
*3
4:3
4:3
16:9
16:9
4:3
16:9
4:3
16:9