Filter
Top Products
128
Setting Network (SX80 II)
■Displaying the Network Configuration Screen
1 Turn on the computer and projector.
2 Launch a web browser, enter "http://192.168.254.254" in the address bar, and press
the Enter key.
The password input screen appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
3 In the password input screen, enter "root" for [User name] and "system" for [Password]
and click the [OK] button.
The projector network configuration screen appears on the web browser.
The following information is displayed.
[Projector name]: The name of the projector on the network
[Location]: The location of the projector
[MAC address]: The MAC address of the projector
[IP address]: The IP address of the projector
[Power Status]: The power status of the projector
[Lamp Time Normal Mode]:The total lamp used time in its normal mode
[Lamp Time Quiet Mode]: The total lamp used time in its quiet mode
[Lamp Time Converted]: The total lamp used time (converted value)
[Filter Time]: The total filter used time
Click the [Settings] button to display the menu screen.