Filter
Top Products
Setting Network (SX80 II)
130
3 Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
Setting items:
[To:]: The E-mail address to which the error report is sent
(Within 63 alphanumeric characters)
[Cc:]: The E-mail address to which the carbon copy of the error
report is sent (Within 63 alphanumeric characters, can be
omitted)
[From:]: The sender of the E-mail (the projector)
[SMTP server IP address]: The IP address of the available SMTP mail server
[SMTP server port number]:The port number of the available SMTP mail server
[SNTP server IP address]: The IP address of the available SNTP mail server (can be
omitted)
[Time zone]: The time zone of the installation site
[Mail resend interval]:
The E-mail resending interval at a transmission failure
Setting range: 0 - 59 seconds (the factory default: 10 seconds)
[Mail resend times]: The number of E-mail resending attempts at a transmis-
sion failure
Setting range: 0 - 255 times (the factory default: 3 times)
[Error report]: Turning ON/OFF the error report sending function (the
factory default: [OFF])