Filter
Top Products
Setting Network (SX80 II)
136
■Projector Control
1 Click the [Projector control] button on the network setting screen.
The projector control screen appears.
Controlled items:
[Power]: Turn ON/OFF the projector (P49, P68)
[Input]: Select an input signal (P54)
[Aspect]: Select an aspect ratio (P62)
[Image mode]: Select an image mode (P67)
[Blank]: Blank out the image temporarily (P70)
[Mute]: Mute the sound temporarily (P71)
[Auto setup]: Perform the auto setup function (P52)
[Auto PC]: Perform the auto PC function (P57)
• For [Input], [Aspect], and [Image mode], select an item and click the [Apply] button.
• Click the [Refresh] button to display the latest information.
• Click the [Back] button to return to the network setting screen.
• Do not use the [Back], [Forward], or [Refresh] button on your web browser when you con-
trol the projector. Using the web browser buttons may cause the projector to be malfunc-
tioned. Be sure to use the buttons on the network setup window.
• Before terminating control of the projector, press the [Refresh] button to check whether
the new setting is properly updated or not.