Filter
Top Products
114
Customizing System Operation (System Settings)
Selecting a Channel on the
Remote control
You can change the channel on the
remote control as follows.
Reducing Motion
Blur
> [System settings] > [Motion blur
reduction]
Motion blur is blurring that occurs
during video playback. Motion blur
reduction can make this blurring
less noticeable. This function is
available in [Presentation] or
[Dynamic] image modes (P97).
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• If motion blur reduction generates
distracting image noise, select [Off].
• Effects of motion blur reduction cannot be
checked during menu display.
• Especially effective for motion of computer
graphics and similar high-resolution
images.
Ch1 Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
Ch2 Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
Ch3 Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
Ch4 Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
Independent Press and hold the OK
button and button at the
same time for 3 seconds.
HDMI Component LAN
Digital PC Analog PC USB
Off Motion blur reduction is not
performed.
On
Motion blur reduction is performed.