Filter
Top Products
273
Completing Application Projection Settings
Networked Multi-Projection Functions in All Modes
Picture qual setting Select one of the following options, depending on your
preferred image quality and frame rate.
High : Projects at a lower frame rate while
emphasizing image quality. Select this
mode if lower image quality is not
acceptable.
Medium : Projection with image quality and frame
rate balanced.
Low : Projects at lower image quality to maintain
a high frame rate. Select this mode to
reduce the network bandwidth used for
projection.
Real On : Projection matching the computer display
resolution. Available under the following
conditions.
When projecting from a single computer—
or during projection from multiple
computers, when projecting an enlarged
image from one computer—at a display
resolution lower than the projector
resolution.
Off : Automatically adjust the projection size to
match the projector screen size.
Projection type Normal : Although some windows cannot be
projected, the cursor on the computer
monitor will not flash.
Advanced : Most windows can be projected, but the
cursor on the computer monitor will flash.
(Only the cursor on the computer monitor
will flash, not the cursor in projected
images.)
Nickname Nickname specified when creating or joining sessions.
Cannot be changed during sessions. This option is not
shown in Direct or Broadcast Modes.
Multicast address The multicast address used in Broadcast Mode can
be changed. Use this setting to change the multicast
address if it conflicts with that of other network
equipment. This option is only shown in Broadcast
Mode.