Filter
Top Products
E-24
General Guide
1
SD Memory Card Slot
2 Program Key (L)
3 Roll Paper Holder
4 Splash Protect
Cover and Paper
Cutter
5 Power Key
6 Indicator 1
(Left Side)
Indicator 2
(Right Side)
7 Speaker
8 Brightness Sensor
9 LCD Panel/Touch
Screen
10 Stroke Keys
11 RS-232C Interface
Connector
(IT-3000M53E/
M54E2)
12 Program Key (R)
13 Power Jack
14 IR Port
Slot for inserting SD memory card.
This key can be assigned any function available.
IT-3000M55E/IT-3000M55U/IT-3000M56E/IT-3000M56U
The default settings are as follows.
This key is used to read bar codes and 2D code.
Roll paper is placed in this holder. Use the optional Paper
Holder when using a formed sheet paper.
Printed roll paper is torn off here. The paper cutter is provided
with a splash protect cover. Open the cover when printing. The
paper cutter is revealed when the cover is opened.
Press this key to turn the power on or off.
This indicator is green when charging the battery pack is
completed and red during charging.
This indicator flashes or lights according to the settings of the
application software.
Generates audio and buzzer tones.
This sensor detects the brightness of the surroundings. The
display backlight and key backlight can be controlled
automatically according to programmed settings. Be careful not
to inadvertently block this sensor.
Displays text, operations, indicators and so forth. In addition,
operations can be performed and data can be input using the
stylus provided.
There are a total of 19 keys including function keys and numeric
keys. Refer to "Key Functions" on page 26 for further details.
Each numeral and symbol on the key buttons in the table above
is backlit.
For connection of a bar code reader and so forth. Connect by
opening the connector cover.
This key can be assigned any function available.
IT-3000M55E/IT-3000M55U/IT-3000M56E/IT-3000M56U
The default settings are as follows.
This key is used to read bar codes and 2D codes.
The AC adaptor is connected to this jack when charging the lithium
ion battery pack. Open the jack cover to connect the AC adaptor.
This is used for IR data communication with another Handheld
Printer Terminal or with the Bridge Satellite Cradle.
IT-3000_E_P16_32.p65 07.10.3, 5:37 PM24