E-7
AC Power Supply
Warning
•
Do not use the Handheld Printer Terminal at a voltage other than the
specified voltage. Also, do not connect the Handheld Printer Terminal to a
multi-plug power strip. Doing so creates the danger of fire and electric shock.
• Avoid conditions that can cause damage or breaks in the power cord. Do not
place heavy objects on the power cord and keep it away from sources of
heat. Any of these conditions can damage the power cord, creating the
danger of fire and electric shock.
• Never modify, sharply bend, twist, or pull on the power cord. Doing so
creates the danger of fire and electric shock.
• Power cable (especially on the plug)
Never use a detergent to clean AC adaptor, especially on the plug and the jack.
• When using the battery charger and Bridge Satellite Cradle, be sure to use
the respective AC adaptors. Use of other AC adaptor model creates the
danger of fire and electric shock.
• Should the power cord become severely damaged (to the point that wires are
exposed or broken), contact your original vendor or an authorized CASIO
service provider about repair or replacement. Use of a damaged electrical
cord creates the danger of fire and electric shock.
Caution
• Keep the power cord away from stoves and other sources of extreme heat.
Heat can melt the covering of the power cord and create the danger of fire
and electric shock.
• Never pull on the power cord when unplugging it. Doing so can damage the
cord and create the danger of fire and electric shock. (Always hold the plug
when unplugging it from the wall outlet.)
• Never touch the plug while your hands are wet. Doing so can create the
danger of electric shock.
• Be sure to unplug the power cord from the wall outlet before moving.
Failure to do so can result in damage to the power cord caused by pulling on
it, which creates the danger of fire and electric shock.
• Be sure to unplug the power cord from the wall outlet before cleaning the
battery charger and Bridge Satellite Cradle.
• Be sure to turn the power off and unplug the power cord after use.
• For safety reasons, unplug the power cord from the wall outlet when not
using for a long period of time.
IT-3000_E_P01_08.p65 07.10.16, 15:097