Filter
Top Products
E-55
1 System Status
Indicator Lamp
2 Communication
Indicator Lamp
3 Power Indicator
Lamp
4 Terminal Detect
Switches
5 IR Port
6 Power Contacts
7 Power Switch
8 AC Adaptor Jack
9 RS-422 Port
10 RS-232C Port
11 USB Port
12 DIP Switches
This lamp indicates whether the system is operating normally.
This lamp indicates the system status and whether or not
communication with the system can be performed regardless of
whether or not a Handheld Printer Terminal is mounted.
Off: System is not operating.
Green: System is operating.
This lamp shows when the Handheld Printer Terminal is
performing data communication.
Off: No data communication being performed
Green flashing: Data communication in progress
Red: Problem with a connection between Bridge Satellite Cradle
This lamp indicates the Power Status and the mounting status of
the Handheld Printer Terminal.
Off: Power off
Green: Power on, Handheld Printer Terminal mounted correctly
Red: Power on, Handheld Printer Terminal not mounted
These switches detect when the Handheld Printer Terminal is
seated correctly on the Bridge Satellite Cradle.
This port transfers data with the Handheld Printer Terminal IR
port by non-contact data communication.
Power is supplied to the Handheld Printer Terminal via these
contacts.
Turns the power on and off.
Connect the AC adaptor here to supply power.
This port is used when connecting to another Bridge Satellite
Cradle.
This port accepts connection of an RS-232C cable for
connection to a computer for transfer of system data and file
data. Use of the RS-232C port requires installation of a special
driver on the PC.
This port accepts connection of a USB cable for connection to a
computer for transfer of system data and file data. Use of the
USB port requires installation of a special driver on the PC.
Use these switches to configure the Bridge Satellite Cradle as
required.
IT-3000_E_P54_77.p65 07.10.3, 5:39 PM55