Filter
Top Products
141
Program 7
TE-2200/2400 Dealer's Manual
Auto-program & system utilities (Program 7)
Auto-programming
Using the auto-program function makes it possible to save and load the terminal program files. Methods available for
saving the terminal program are as follows:
1) Saving onto a personal computer connected through online.
2) Saving onto a CF card.
To ensure quick recovery from a corrupted file resulting from user error or system failure, it is recommended that you
maintain backup copies of current terminal programs on a file basis.
Terminal program files can be loaded using procedures opposite to those used for saving.
Note
Data except for program data and totalizer/counters, such as subtotal amount, item counter, and work area, cannot be saved
by the auto-programming function.
Never plug/unplug the CF card during auto-programming.
Auto-programming functions
The terminal is capable of saving and loading terminal program files. The terminal has the following transfer functions:
1) Copy complete terminal files (send/receive: activation by source terminal) :Command code 900
This function copies complete terminal files (except system work files) with counter and totalizers. When a file is not
reserved on the target terminal, the file is created automatically. This function is used for backing up a terminal.
2) Copy all terminal files (send/receive: activation by source terminal): Command code 090 (or 990)
This function copies all terminal files (except system work files and terminal ID No.) with counter and totalizers. When a
file is not reserved on the target terminal, the file is created automatically. This function is used for copying a terminal data
to other terminal.
3) Copy all terminal program files (send/receive: activation by source terminal): Command code 092
This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutive
No.) without counters and totalizers. When a file is not reserved on the target terminal, the processing file is skipped.
4) Copy all terminal program files with file allocation (send/receive: activation by source terminal): Command code 992
This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutive
No.) without counters and totalizers. When a file is not reserved on the target terminal, the file is created automatically.
5) Copy individual terminal program files (send/receive: activation by source terminal) Command code 0xx (xx: file No.)
This function copies the specific terminal program file (except system work files) without counters and totalizers. When the
specific file is not reserved on the target terminal, it is skipped.
6) Copy individual terminal program files with file creation (send/receive: activation by source terminal)
Command code 9xx (xx: file No.)
This function copies the specific terminal program file (except system work files) without counters and totalizers. When the
specific file is not reserved on the target terminal, it is allocated automatically.