Filter
Top Products
231
Appendix (Error code)
TE-2200/2400 Dealer's Manual
System error code
Error
code
Meaning
File I/O errors
750 File cannot be created.
751 No designated drive
752 FCB area shortage of flash memory
753 No appropriate record number is designated.
754 No partition exists.
755 No vacant record is remained.
756 Changing is not permitted.
757 The designate file cannot be found.
758 The same file has already existed.
759 The same page has already existed.
760 No vacant record is remained.
762 The contents of internal memory and CF card are different.
763 The contents of scanning PLU file among the master/satellite
terminals are different.
764 Write error
CF card I/O errors
781 CF card device error
783 CF card format error
785 No designated file
788 The file is already existed in the CF card.
Communication errors
2000 Network join error
2001 Inline port open error
2002 Inline synchronize error
2003 Inline command error
2004 Time over
2005 Parameter error
2006 Time out
2007 ID number over error
2008 Packet error
2009 ID
2010 WAK receive error
2011 Packet type error
2012 Sequence error
2013 Packet format error
2014 Time over (5 seconds)
2015 User time out
2016 Other communication error
2017 Not found PLU area error
2018 Online port open error
2019 No response
2020 File not found
2021 File create error
Error
code
Meaning
2022 File I/O error
2023 Retry error
2024 Receive SYN error
2025 Receive FIN error
2026 FIN is in sending sequence whole recalling n_write()
2027 Illegal format
2028 Illegal command
2029 Busy with response
2030 Communication abortion
2031 Online receiving hardware error
2032 Inline receiving hardware error
2033 Online receiving overrun
2034 Online sending hardware error
2035 Inline sending hardware error
2036 Token is not detected while sending
2037 Time over while detecting DSR ON
Program data send/receive (auto-program) errors
2100 Command code error
2101 Index format error
2102 Machine ID number error
2103 Maximum record number error
Mail box function errors
2300 Mail box full error
2301 Job number error
Other errors
2900 Break operation
2901 Password error
2902 I/O parameter program error
Logic driver initialize common errors
5000 Parameter error (Illegal information of I/O parameter)
5001 No connection (Illegal information of I/O parameter)
5010 Logical driver COM open error
5011 Logical driver COM double open
5012 Logical driver COM not open
5013 Logical driver COM device error
5014 Logical driver COM remain data error
MODEM errors
5300 MODEM initialize error
5301 MODEM open error
5302 Negotiation error
5303 AT command sending error
5304 Control ER error
5305 Receive status error