Filter
Top Products
11
Installing Original Advertisements (POP Ads)
The menu of the shop, special bargain items and customer notices can be displayed on the back of
the connector cover.
Steps
1. Put your nger on the bottom of the transparent cover at the back of
connector cover, and pull it up towards you to remove the transpar-
ent cover.
2. Place the ad to display on the back of the connector cover, and
install it by pressing it down from above with the transparent cover.
Install the transparent cover by pressing the tabs in the depressions
at right and left at the top of the connector cover, then pressing the
bottom.
If a power outage or malfunction prevents the drawer from opening, the drawer can be opened by
using the drawer release lever (a xture at the bottom of the drawer).
Steps
1. Move the drawer release lever (gure on the right) in the direction of
arrow to open the drawer.
Drawer release lever
If the drawer is locked with the drawer lock key, this method cannot open the drawer.
Unlock the drawer with the key.
+
When the device is installed on top of the drawer, take care that it does not fall off of the
drawer when operating the drawer release lever.
Removing the printer cover
Put your nger on the left side hook and lift up
to remove the printer cover
Attaching the printer cover
Position the printer cover as if you are putting
it on from above and attach it. Make sure that it
doesn’t rattle.