Filter
Top Products
15
Loading a USB Device
Steps
1. Remove the side cover on the side of the main display. It
comes off easily when you insert your nger in the depres-
sion and pull it up.
2. Insert a USB device into the USB slot.
3. When removing the USB device, pull out the USB once it can
be safely removed. Be sure to attach the side cover when the
USB device is not in use.
-
● Do not adjust the main display while a USB device is loaded. It may cause the USB
device to touch something in the area and be damaged.
● Do not use with the side cover removed. Water or foreign matter may get inside and
cause a failure.
USB Hub Ferrite Core
When using a USB hub*, be sure to attach the ferrite core that came with the V-R100 to the cable for
the USB hub. If the ferrite core is not installed, it may cause a malfunction.
Installation Method
50mm
Ferrite core Ferrite core
Notch (female)
Closed state
Notch (male)
1. As in the diagram, wrap the cable around the
ferrite core once.
2. Close the core. Conrm that the notches of
the core are secured.
* A USB hub does not come with the V-R100.
For detailed information, contact your sales outlet.