Filter
Top Products
13
Changing Printer Paper
When only about one meter of printer paper is remaining, a red line will appear. Change to a new roll
of paper at your earliest convenience.
Steps
1. Remove the printer cover. Put your nger on the paper holder
and lift it up, then open the arm to the position where it stops
naturally.
2. Remove the core of the printer roll in the paper compartment.
Refer to the procedure after step 2 of Loading Printer Paper
(page 12) to load a new roll of paper.
Installing an SD/SDHC Memory Card
Steps
1. Remove the side cover on the side of the main
display. It comes off easily when you insert
your nger in the depression and pull it up.
2. Unscrew the screws holding the card cover to
remove it.
3. Insert an SD/SDHC memory card with its top
surface facing the display.
4. Secure the card cover with screws and then
attach the side cover.