Filter
Top Products
18
General Guide
[Bottom]
1
Elevation adjustment foot : Rotate to change the angle of the projector.
)To change the projector elevation angle (page 35)
2 Release button : Press to release the elevation adjustment foot.
3 Left, right adjustment feet (2) : Rotate for fine adjustment of the left and right angle of
the projector.
)To change the projector elevation angle (page 35)
4 Intake vents : Intake air for cooling.
)Setup Precautions (page 33)
5 Lamp cover : Open this cover to replace the lamp.
)To replace the lamp (page 114)
Warning
Never allow the intake vents on the back or the bottom of the projector
to become blocked. Blocked vents can cause heat to build up, creating
the risk of fire and malfunction.
12
3345