Filter
Top Products
Safety Precautions
9
Lamp Precautions
●Lamp removal
Never remove the lamp from the
projector immediately after using
it. The lamp becomes very hot
during use, creating the risk of
burn injury. Turn off the projector.
After the POWER/STANDBY
indicator changes to steady (not
flashing) amber, unplug the
projector from the power outlet.
Next, wait for at least 60 minutes
before removing the lamp.
●Specified lamp type
Use only the lamp type that is
specified for this projector. Use of
any other type of lamp creates
the risk of fire and breakdown.
●Lamp replacement
Before replacing the lamp, be
sure to turn off the projector and
unplug it from the power outlet.
Failure to do so creates the risk
of electric shock.
• Take care when replacing a
broken lamp.
A broken lamp can cause
glass fragments to be
scattered inside the lamp
housing. Glass inside of the
lamp housing may also be
discharged from the projector’s
vent exhaust ports. Gas inside
of the lamp includes mercury,
so be sure to ventilate the
area whenever the lamp
breaks. Should you accidentally
inhale gas fumes or should
gas fumes get into your eyes,
immediately contact a
physician.
●Broken lamp
Never attempt to replace a
broken lamp on your own. The
projector uses a mercury lamp
with high internal pressure as its
light source. Should the lamp
break, be sure to contact your
original dealer or authorized
CASIO service center to request
replacement. Attempting to
replace a broken lamp on your
own creates the risk of personal
injury due to broken glass or
dispersed mercury.
Warning Caution