Filter
Top Products
Projection Operations
51
Auto Adjustment of an RGB Image
When the input source is RGB (computer), the projector automatically adjusts vertical and
horizontal positioning, frequency, and phase whenever it detects an RGB signal (following input
source selection, power up, etc.) You can also execute an automatic adjustment operation by
pressing the [AUTO] key.
z You can turn off auto adjustment (page 93) when you want to disable auto adjustment
and maintain manual settings.
z The projected image may become distorted while an auto adjustment operation is in
progress.
z The [AUTO] key is disabled whenever S-VIDEO, VIDEO, or Component is selected as the
input source.
z If an image is unclear following the auto adjustment operation, you can use the menu to
adjust items manually. For details, see “Image Adjustment” on page 77.