Filter
Top Products
Projection Operations
46
Projection Operations
This section explains operations that are related to projection of an image.
This section explains the basic steps for projecting an image.
Basic Flow
Projecting onto a Screen
Preparing the Projector
Starting
Projection
Set up the projector and point it at the screen.
Connect the computer or video device to the projector
Turn on the projector and the connected computer or video device.
Press the [
] (power) key to turn on the projector.
Perform fine adjustment of the projection position and angle.
Select the input source.
Adjust the projected image size and focus the image.
Start projection (presentation, video, etc.)
• Perform the required operation on the input source computer or video equipment.
• Use the projector’s various functions to adjust the projected image as required.
) “Setting Up the Projector” (page 30)
()page 37 to 40)
) “Turning On the Projector” (page 41)
) “Adjusting the Projector Elevation Angle” (page 35)
) “Manually Selecting the Input Source” (page 48)
) “Zoom and Focus” (page 50)