Filter
Top Products
54
Projection Operations
Performing Auto Keystone Correction and Auto Focus while AF/AK is
Enabled
Perform the following steps while [AF/AK] is selected for “Option Settings2 J AF/AK Mode”
(page 106) on the setup menu.
1. Press the [AF/AK] key.
z This automatically focuses the image and performs auto keystone correction.
Performing Auto Keystone Correction and Auto Focus while
Continuous AF/AK is Enabled
Perform the following steps while [Continuous AF/AK] is selected for “Option Settings2 J AF/
AK Mode” (page 106) on the setup menu.
1. Press the [AF/AK] key.
z This enters the pre-focus mode, which projects an alignment chart like the one shown
below.
z The size of the alignment chart depends on screen and projector setup conditions.
2. Adjust the angle and position of the projector as required so the
projected chart fits within the screen area.
3. Press the [AF/AK] key again.
z This performs auto keystone correction.