Filter
Top Products
56
Projection Operations
3. Use the [W] and [X] keys to correct for keystoning.
z Each press of [W] or [X] shifts the indicator on the currently selected bar left or right.
z Repeat steps 2 and 3 to perform keystone correction for the other direction, if you
want.
4. After the settings are the way you want, press the [ESC] key or the
[KEYSTONE] key.
z This causes the keystone correction screen to disappear.
z The allowable ranges for manual keystone correction are –30 to +30 degrees vertically,
and –30 to +30 degrees horizontally.
You can use the remote controller keys to adjust the volume level of the audio that is output
from the projector’s speaker.
To adjust the volume level
1. On the remote controller, press the [VOL +] or [VOL –] key.
z This causes the [Volume] screen to appear on the projected image.
2. Press the [VOL +] key or the [X] key to increase the volume, or the
[VOL –] or [W] key to lower the volume.
3. After the setting is the way you want, press the [ESC] key.
z This causes the [Volume] screen to disappear.
Adjusting the Volume Level (VOL +/–)