Filter
Top Products
— 107 —
GS L nL nH
[Function] Setting the left margin
[Code] <1D>H<4C>H<nL><nH>
[Range] 0
nL 255
0
nH 255
[Outline] This command sets the left margin specified by nL and nH. The
value of the left margin is [(nL + nH × 256) × basic calculation
pitch].
Print Area Width
[Caution] • This command only works when it is entered at the beginning
of a line.
• The setting of this command does not affect PAGE MODE.
• The maximum settable left margin is equal to the horizontal
printable area. A setting greater than this maximum is trimmed
to the maximum.
• The basic calculation pitch is defined by GS P. Once defined,
the left margin is not changed if the basic calculation pitch is
changed by GS P.
• The left margin is calculated with the horizontal basic
calculation pitch (x) set by GS P. A fraction resulting from the
calculation is corrected with the minimum pitch of the
mechanism, and the remainder is omitted.
[Default] nL = 0, nH = 0
[See Also] GS P, GS W
Left Margin
Printable Area