Filter
Top Products
— 140 —
[Caution] • Too frequent use of this command may destroy the non-volatile
memory.
• Just after the completion of the writing operation into the non-
volatile memory, the printer hardware will be reset. Therefore,
download characters, download bit images, and macro
definition will be cleared. Then, the status of dip switches will
be checked once more.
[Related Commands]
FS p
(yL + yH × 256) × 8 dots = 768 dots
[Example] When xL =64, xH = 0, yL = 96, yH = 0
(xL + xH × 256) × 8 dots = 512 dots