Filter
Top Products
— 10 —
4. OPERATION
4.1 Connecting the AC Adapter and AC Power Cord
1
Turn off the power of the printer.
2
With the flat side of the AC adapter’s
cable connector facing upward,
insert the cable connector into the
power connector on the back side of
the printer.
3
Connect the AC power cord to the
AC adapter of the printer or the AC
adapter, and insert the AC power-
cord plug into a suitable wall outlet.
CAUTION:
• Do not use any AC adapter other than specified.
• When connecting or disconnecting the cable connector of the AC adapter, always pull
on the connector, not on the cable.
• The AC power cord should be connected to a wall outlet separated from others used
by other equipment which tend to emit noise.
• Avoid pulling on the AC adapter cord, or the cord may be damaged or broken, causing
a fire, electric shock.
• When the thunder rumbles nearby, disconnect the AC adapter from the wall outlet to
avoid using the printer; otherwise, a thunderbolt may cause a fire or electric shock.
• Avoid placing the AC adapter cord near a heating device; otherwise, the cover of the
cord may melt, causing a fire or electric shock.
• When you are not going to use the printer for a long period of time, disconnect the AC
adapter from the wall outlet for safety.
Cable
connector
AC adapter
AC power cord
Power
connector
Flat side