Filter
Top Products
— 54 —
DLE ENQ n
[Function] Real-time request to printer
[Code] <10>H<05>H<n>
[Range] 1
n 2
[Outline] The printer responds in real-time to the requests from the host.
n = 1: After recovering from an error, the printer resumes
printing from the beginning of the line where the error
occurred.
n = 2: The printer clears the receive buffer and the print buffer,
and then recovers from the error.
[Caution] • This command is only effective if an auto cutter error has
occurred.
• If the cause of the error has not been removed completely, the
printer may not be recovered from the error status.
• This command is dealt with when it is received.
• This command is also executed even if the printer is in a
receive-buffer full state.
• If a data string of <10>H<05>H<n>(1
n 2) is present in the
received data, the printer acts in the same way as with this
command. The user should, therefore, be reminded of this
fact.
[Example] Within bit image data of a bit image, etc.
ESC * m nL nH {d} k, where d1 = <10>H, d2=<05>H, d3=<01>H1.
• Even if DLE ENQ 2 is executed, the settings made by, for
example, ESC ! and ESC 3 retain the conditions when the error
occurred. A combined use of this command and ESC @ can
completely initialize the printer.
[See Also] DLE EOT