Filter
Top Products
— 14 —
4
Check the winding direction of the
paper roll, and then place it into the
paper roll holder in the Top cover.
5
With the paper roll placed between
the platen levers on both sides of
the printer, pull the end of the paper
roll out up to the end of the Top
cover, and close the printer cover.
The paper roll is set to come out of
the printer through the paper output
slot automatically.
6
Cut off the portion of the paper that
is out of the printer using the
tear bar on the auto cutter.
Top cover
Platen lever
Platen lever