Filter
Top Products
17
Jack PC Hardware User Manual - Training Department
Version 0506
3 Trim the cut out gently and check
that the housing fits in properly.
4 Pull out the LAN cable and remove 4
cm/1.5 inch of its plastic insulation.
Separate wire pairs by color and roll
the shielding wires together.
5 Open the IDC Termination
Connector Block red cover. Secure
the wires with an Corona Punch-
Down Tool by using the appropriate
color scheme, according to TIA568
version A or B as shown in picture.
Note: use only the tool supplied by
Chip PC – (see accessories list for
more details)
Follow the instruction in
paragraph 6 – Wiring
Configurations for additional
information.