Filter
Top Products
47
Jack PC Hardware User Manual - Training Department
Version 0506
F. Product materials information
F1. Restricted Substances
This Chip PC product (plastic case parts, printed wiring boards, power supplies, and microprocessors) does NOT
contain any of the following substances (in concentrations exceeding natural background levels)
• Asbestos
• Cadmium and its compounds above 100 parts per million (ppm)
• Halogenated dioxins or furans (i.e. polychlorinated dibenzodioxines, polychlorinated
dibenzofurans)
• Halogenated flame retardants (chlorinated, brominated) in plastic parts over 25g
• Mercury (except for fluorescent bulbs used in display units)
• PCBs (polychlorobiphenyls) or PCTs (polychloroterphenyls)
• PBBs (polybromobiphenyls) or PBDEs (polybrominated diphenylethers)
• PVC (polyvinyl chloride) other than in cables and interconnect parts
• CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) and other ozone depleting
substances
None of the substances included in the Montreal Protocol annex A, B, or C is used in Chip PC’s manufacturing
plants.
F2. ADDITIONAL MATERIALS INFORMATION
• The cables may use PVC as an insulating material to ensure product safety
• The case material is all metal
• This product does not contain one or more mercury bulbs
2
Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and
substances as listed above.
F3. FLAME RETARDANTS USED IN MECHANICAL PLASTIC PARTS > 25 GRAMS AND PRINTED WIRING
BOARDS
Part Flame Retardant ISO 1043-4 ISO 11469
Mechanical Plastic Parts > 25 grams PC+ABS Triaryl Phosphate Ester FR(40) ISO 11469
Printed Wiring Board TBBPA FR(16) N/A
Mechanical Plastic Parts > 25 grams ABS None None ISO 11469
F4. COMPLIANCE WITH ROHS – LEAD-FREE INFORMATION
This product was redesigned to comply with the European Union’s Directive 2002/95/EC, Restrictions of Hazardous
Substances (”RoHS” Directive) and similar regulations that may be adopted by other countries. All products
manufactured after the 1
st
of January 2006 are fully compliant with the European Union’s Directive 2002/95/EC
unless written differently on product will contain only allowed substances.
ROHS Declaration
This product does not contain RoHS restricted substances as homogeneous materials:
a) Greater than quantity limit of 0.1% (1000 PPM) for:
1. Lead (Pb)
2. Mercury
3. Hexavalent Chromium in non-metallic applications (paints, pigments and plastics)
4. Polybrominated Biphenyls (PBB)
5. Polybrominated Diphenyl Ethers (PBDE);
b) Hexavalent Chromium in metallic applications: Corrosion preventative coatings (conversion coatings) containing
Hexavalent Chromium shall not be used in metal parts, components, materials or products. And impurities shall not
exceed 0.1% (1000 PPM) in any metallic application;
c) Greater than quantity limit of 0.01% (100 PPM) for:
1. Cadmium.