Chip PC CDC01927 Computer Hardware User Manual


 
24
Jack PC Hardware User Manual - Training Department
Version 0506
5 JACK-PC SPECIFICATIONS
CPU
EFI 6700 AMD Au 1550 Alchemy processor, 333 MHz RISC
(equivalent to 800MHz x86 TC Processors)
EFI 6800-6900 AMD Au 1550 Alchemy processor, 500 MHz RISC
(equivalent to 1.2 GHz x86 TC Processors)
Memory
EFI 6700 64 MB DDR
EFI 6800-6900 128 MB DDR, 400 MHz
Mass Storage
EFI 6700 32 MB Disk-On-Chip with True File System
EFI 6800-6900 64 MB Disk-On-Chip with True File System
Display
Color VGA / SVGA / XGA, DB-15HD female connector
EFI 6700/6800
o Resolution 1280x1024x16M (24bit True Color) @70Hz
o 128-bit 3D graphics acceleration engine with separate 4
MB display memory SDRAM (6700) and 8 MB display
memory SDRAM (6800).
o Supports VESA standard CRT & LCD
o Analog Out
o Up to 5m extension cable
EFI 6900
o Resolution 1600x1200x16M (24bit True Color) @70Hz
(future)
o 128-bit 3D graphics acceleration engine with separate 8
MB display memory SDRAM.
o Supports VESA standard CRT & LCD
o DVI-I connector supporting Analog/DVI monitors
o Y-cable for dual screen support should be purchased
separately from Chip PC. See accessories list for more
information
o Up to 30m active extension DVI cable
Input / Output
4 USB 2.0-compatible ports
Cable adaptors (USB-to-PS/2, USB-to-Serial, 1 or 2 ports, should
be purchased separately from Chip PC. See accessories list for
more information
Audio Support
Audio Output - 3.5 mm (1/8 inch) Audio-Out Jack; full 20-bit Stereo
Audio Input - 3.5 mm (1/8 inch) Audio-In Microphone Jack
CODEC with VOIP support
Status Lights
Power ON/Self Test Passed (Green)
Power STBY/Self-Test Failed (Red)
LAN Link/Activity (Green/Amber)
Network
10/100 Fast Ethernet, twisted pair (RJ-45) with Auto negotiate
TCP/IP with DNS and DHCP
Point-to-Point Protocol (PPP)
SNMP support allows remote configuration of device settings,
reporting of device configuration
Compliant with standards: IEEE 802.3-LAN & 802.3U-LAN
Operating
System
Microsoft Windows CE.NET kernel
OS version 4.2 or 5.0
Power
Power-over-Ethernet (PoE) IEEE 802.3af
Maximum power consumption: 5W
Power consumption (sleep mode): Less than 1W
Voltage range: 48 VDC nominal 36-56 VDC per 802.3AF standard
In case PoE is not available - external wall-mount power supply
can be used: Use only Chip PC-supplied, UL-listed direct plug in
AC/DC adapter (Chip PC part number: CPN1491 or CPN1503 or
CPN1504) See accessories list for more information