Filter
Top Products
1-4
Cisco AVS 3120 Application Velocity System Hardware Installation Guide
OL-11805-01
Chapter 1 Product Overview
Ports and Connectors
Ethernet Connectors
The AVS 3120 has four integrated 10/100/1000–megabit-per-second (Mbps) Ethernet connectors. The
Ethernet controller provides an interface for connecting to 10-Mbps, 100-Mbps, or 1000-Mbps networks
and supports autonegotiate, full-duplex, or half-duplex operation on an Ethernet LAN.
To access an Ethernet port, connect a Category 3, 4, or 5 unshielded twisted-pair (UTP) cable to one of
the RJ-45 connectors on the back of the chassis. The ports have different functions depending on how
the AVS software is configured. For details on port assignments, see the Release Note for the Cisco
Application Velocity System and the Cisco Application Velocity System User Guide.
Note The 100BASE-TX/1000BASE-TX Ethernet standard requires that you use standard four twisted-pair
Category 5e cable at lengths up to 328.08 ft. (100 m).
Figure 1-3 shows the four built-in Ethernet ports, which have two indicators per port.
Figure 1-3 Ethernet Port Indicators
Table 1-1 lists the Ethernet port indicators.
Figure 1-4 shows the 10/100/1000BASE-TX (RJ-45) port pinouts.
143773
USB2
USB1
LNK SPD
2
LNK SPD
3
LNK SPD
4
LNK SPD
1
MGMT
1
Table 1-1 Ethernet Port Indicators
Indicator Color Description
Left side Green solid
Green blinking
Physical link
Network activity
Right side Not lit
Green
Amber
10 Mbps
100 Mbps
1000 Mbps