Cisco Systems 3120 Network Hardware User Manual


 
1-5
Cisco AVS 3120 Application Velocity System Hardware Installation Guide
OL-11805-01
Chapter 1 Product Overview
Ports and Connectors
Figure 1-4 10/100/1000 Port Pinouts
RJ-45 Cables
Cisco products use the following types of RJ-45 cables:
Straight-through
Cross-over
Rolled (console)
To identify the RJ-45 cable type, hold the two ends of the cable next to each other so that you can see
the colored wires inside the ends, as shown in Figure 1-5.
Figure 1-5 RJ-45 Cable Identification
Examine the sequence of colored wires to determine the type of RJ-45 cable, as follows:
Straight-through—The colored wires are in the same sequence at both ends of the cable.
Cross-over—The first (far left) colored wire at one end of the cable is the third colored wire at the
other end of the cable.
Rolled—The colored wires are in the opposite sequence at either end of the cable.
60915
231 45678Pin Label
1
2
3
4
5
6
7
8
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-
H5663