Cisco Systems A03D600GA2 Computer Drive User Manual


 
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
CONFIGURING the SERVER
25
UCS-RAID-9285CV-E or
UCS-RAID9286CV-8E
LSI MegaRAID SAS 9285CV-8e or 9286CV-8e (RAID 0, 1, 5, 6, 10)
Supports from one to eight external SAS ports (up to 240 external drives).
Includes an chassis-mount (remote) supercapacitor to power on-board
1 GB flash-backed write cache.
Factory-configured RAID options: RAID 0, 1, 5, 6, 10 (see the RAID
Configuration section in this table). Note that factory RAID configuration is
not available for these controllers, because the factory does not control
the storage array attached to them.
Super Capacitor Option
UCS-RAID-CV-SC= LSI CacheVault Power Module. This is a spare supercapacitor. It is the exact
same supercapacitor that ships with the 9271CV-8i, 9285CV-8e, and 9286CV-8e
cards listed earlier in this table and can be used as a replacement or upgrade
part.
RAID Configuration Options (not available for embedded RAID)
R2XX-SRAID0 Enable Single Disk Raid 0 Setting (for the following PIDs only):
UCS-RAID9271-8i or UCS-RAID9271CV-8I
UCSC-RAID-11-C220
UCSC-RAID-MZ-220
R2XX-RAID0 Factory preconfigured RAID striping option
Enable RAID 0 Setting. Requires a minimum of one hard drive.
R2XX-RAID1 Factory preconfigured RAID mirroring option
Enable RAID 1 Setting. Requires exactly two drives with the same size, speed,
capacity.
R2XX-RAID5 Factory preconfigured RAID option
Enable RAID 5 Setting. Requires a minimum of three drives of the same size,
speed, capacity.
R2XX-RAID6 Factory preconfigured RAID option
Enable RAID 6 Setting. Requires a minimum of four drives of the same size,
speed, capacity.
R2XX-RAID10 Factory preconfigured RAID option
Enable RAID 10 Setting. Requires a even number of drives (minimum of four
drives) of the same size, speed, capacity.
Table 8 Available PCIe RAID Controller Options (continued)
Product ID (PID) PID Description
NOTE: For SAS 9285CV-8e or 9286CV-8e external drive enclosure
support, see the compatibility list (enclosure section) at the following
link:
http://tinyurl.com/b4etshk
Cisco is able to support customers with questions related to the SAS
9285CV-8e or 9286CV-8e RAID card; however, customers should contact
their storage vendor for technical support related to enclosure/JBOD.