Filter
Top Products
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
28
CONFIGURING the SERVER
Caveats
■ Note that only a single Cisco VIC card (the half-height Cisco VIC 1225 PCIe card) is supported
and it must be installed in the full-height PCIe slot (slot 1) on riser 1. So take this into
account when populating RAID controller cards.
■ You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is
preconfigured at the factory. The RAID level you choose must be an available RAID choice for
the controller selected. RAID levels 50 and 60 are supported, although they are not available
as configuration options.
NOTE: RAID for the external RAID controllers (LSI MegaRAID SAS 9286CV-e and LSI
MegaRAID SAS 9285CV-e) is not factory configured.
NOTE: For more important information regarding RAID combinations and support,
see
RAID Details, page 65 and RAID Option ROM (OPROM) Settings, page 66.