Filter
Top Products
C-2
Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide
OL-9403-04
Appendix C Access Point Specifications
Power output settings
CCK OFDM OFDM
100, 50, 12.5, and 6.25 percent settings on the controller
100 mW (20 dBm) conducted 50 mW (17 dBm) conducted
Maximum output power depends on the regulatory domain in which the access point is installed
Antenna AIR-AP1010
• Two integrated 6 dBi patch antennas (2.4 and 5 GHz)
AIR-AP1020 and AIR-AP1030
• Two integrated 6 dBi patch antennas (2.4 and 5 GHz)
• Three external antenna connectors
Frequency 2.400 to 2.497 GHz
(Depending on the regulatory domain in which the access point is
installed)
5.15 to 5.25 GHz
5.25 to 5.35 GHz
5.475 to 5.725 GHz
5.725 to 5.85 GHz
(Depending on the regulatory
domain in which the access point
is installed)
Data rates 1, 2, 5.5, and 11 Mbps 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
Typical indoor range
(across open office
environment)
160 ft (49 m) @ 11 Mbps
410 ft (125 m) @ 1 Mbps
90 ft (27 m) @ 54 Mbps
180 ft (100 m) @ 18 Mbps
300 ft (91 m) @ 6 Mbps
45 ft (14 m) @ 54 Mbps
110 ft (34 m) @ 18 Mbps
165 ft (50 m) @ 6 Mbps
Compliance The 1000 series access point complies with UL 2043 for products installed in a building’s
environmental air handling spaces, such as above suspended ceilings.
Caution The power injector and power module have not been tested to UL 2043 and they should not
be placed in a building’s environmental air space, such as above suspended ceilings.
Safety Designed to meet:
IEC 60950-1
UL 60950-1
CSA 60950-1
EN 60950-1
UL 2043
Radio Approvals FCC Parts 15.247
Canada RSS-210
Japan ARIB-STD-33A
Japan ARIB-STD-66
Europe EN-300.328
FCC Part 15.407
Canada RSS-210
Japan ARIB STD-T71
EN 301.893
Table C-1 Access Point Specifications (continued)
Category
Specifications
802.11b 802.11g 802.11a