Cisco Systems Network Router Network Router User Manual


 
xv
Cisco PNNI Network Planning Guide for MGX and SES Products, Release 5
Part Number OL-3847-01 Rev. D0, April, 2004
About This Guide
Documentation
Note Manual titles may be different for earlier software releases. The titles shown in Table 1 are for the April
2004 release.
Technical Manual Titles and Descriptions
Table 1 lists the technical manuals and release notes that support the April 2004 multiservice switch
product releases. Books and release notes in Table 1 are listed in order of use and include information
about which multiservice switch or media gateway the document supports.
The books for Cisco MGX 8230, Cisco MGX 8250, and Cisco MGX 8850 (PXM1) switches were not
updated for the April 2004 release, therefore, some information about configuring and using the new
MPSM-8-T1E1 card in these switches is included in the following books:
Cisco ATM Services (AUSM/MPSM) Configuration Guide and Command Reference for MGX
Switches, Release 5
Cisco Frame Relay Services (FRSM/MPSM) Configuration Guide and Command Reference for
MGX Switches, Release 5
Cisco Circuit Emulation Services (CESM/MPSM) Configuration Guide and Command Reference for
MGX Switches, Release 5
Information about how to install or upgrade to the MPSM-8-T1E1 card in Cisco MGX 8230, Cisco
MGX 8250, and Cisco MGX 8850 (PXM1) switches is in the Release Notes for Cisco MGX 8230, Cisco
MGX 8250, and Cisco MGX 8850 (PXM1) Switches, Release 1.3.00.
Note Refer to each product’s release notes for the latest information on features, bug fixes, and more.
Terms
Two main types of ATM cards are used in MGX switches: AXSM and AUSM. AXSM stands for ATM
Switching Service Module. AUSM stands for ATM UNI (User Network Interface) Service Module.
CWM stands for Cisco WAN Manager, our multiservice switch network management system.
Legacy service module refers to a previously introduced card. For this release, the term is used
specifically for the CESM-8-T1E1, FRSM-8-T1E1, and AUSM-8-T1E1 cards, which can now be
replaced by the new MPSM-8-T1E1 card.
MPSM stands for Multiprotocol Service Module.
RPM stands for Route Processor Module.
SES stands for Service Expansion Shelf.
VISM stands for Voice Interworking Service Module.
VXSM stands for Voice Switch Service Module.