Filter
Top Products
Cable Installation and Interface Configuration 7-13
Checking the Configuration
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Chassis Interface.
1 VIP2 controllers (2 HSSI).
2 HSSI network interfaces.
125K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2
Use the show diag slot command to determine which type of port adapter is installed on a VIP2 in
your system. Specific port adapter information is displayed, as shown in the following example. Two
HSSI port adapters are in port adapter slots (bays) 0 and 1, on a VIP2 in interface processor slot 1:
Router# show diag 1
Slot 2:
HSSI-B port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 2d13h ago
Hardware revision 1.17 Board revision A0
Serial number 4518292 Part number 73-1801-05
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20:01 74 01 11 00 44 F1 94 49 07 09 05 00 00 00 00
0x30:50 00 00 00 97 04 21 00 FF FF FF FF FF FF FF FF
Slot database information:
Flags: 0x4 Insertion time: 0x14E8 (3d00h ago)
VIP Controller Memory Size: Unknown
PA Bay 0 Information:
HSSI-B PA, 1 ports
EEPROM format version 1
HW rev 1.1, Board revision A0
Serial number: 04551053 Part number: 73-1801-05
PA Bay 1 Information:
HSSI-B PA, 1 ports
EEPROM format version 1
HW rev 1.1, Board revision A0
Serial number: 04518147 Part number: 73-1801-05