Filter
Top Products
Installation Overview
PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration
3-2
The PA-FE-TX and PA-FE-FX can be installed in either port adapter slot 0 or port adapter slot 1 on
the VIP2. Figure 3-1 shows a PA-FE-TX installed in port adapter slot 0 on a VIP2-15 or VIP2-40.
Figure 3-2 shows a PA-FE-FX installed in port adapter slot 0 on a VIP2-15 or VIP2-40.
Figure 3-1 VIP2-15 or VIP2-40 with a PA-FE-TX in Port Adapter Slot 0
Note The PA-FE-FX has the MII connector like the PA-FE-TX, but has an SC-type fiber-optic
connector in place of the RJ-45 connector.
H6449
PA-FE-TX in
port adapter
slot 0
Port adapter blank
in port adapter
slot 1
Port adapter handles not shown
Bus connector
MII
LINK
RJ45
0
FAST ETHERNET
ENABLED
DRAM
SIMMs
SRAM
DIMM U5
CPU
Boot ROM
U6
U2
U4